H & S Model 25 ground drive Manure Spreader is 25 bushel with 5 x 12 deep lug traction tires.  The spreader box is constructed of corrosion resistant galvanized steel.  All spreaders utilize a bonded poly floor to reduce main apron grad and power to the load. The beater on Model 25 is 20 inches in diameter and with 8 paddles provides an even spread of material. The Model 25 Manure Spreader is ideal for the smaller scale farm, horseman or organic farming operation.   Just $ 2,150.00  (NE 3819)

            H & S Model 175 Manure Spreader, 175 bushel uses an all welded heavy duty

           A-Frame hitch assemble and full length unitized main frame.

           The jack is standard.  The spreader box is constructed of corrosion resistant galvanized steel.

           All spreaders utilize a bonded poly floor to reduce main apron drag and power to move the load.    ONLY  $ 8,695.00 (NE3334)

                                                                                   The optional hydraulic end gate is pictured at left.

                                                                                                        The large diameter beater with aggressive ripper paddles

                                                                                                        assures wide even chunk free spread patterns.

               Easy Controls:  Shifting on the 175 is done in the H & S two speed gear box

               plus beater shutoff.  The engagement for the spreader is done simply by pulling

               the rope and shifting the spreader to low, high or clean out.

            Easy main apron adjustment:  The jack can be stored out of the way

              during operation so damage does not occur.

              Adjustments for the main apron are easy,

              by simply loosening the two side bolts and drawing up the long bolt.

                                                                                          H & S Model 235 Manure Spreader, 235 bushel, has a patented 2 speed gear box.

                                                                                          Shifting is all done in the enclosed 2 speed / beater shutoff gear box.

                                                                                                                            $  10,802.00 with hydraulic endgate  (NE3322)   

                                           Rear pan is standard on the 235 Manure Spreader    

           H & S Manure Spreaders have a massive unitized welded frame

           with heavy floor supports and side stakes, wrap around steel front corners.

            Strong rear main beater side panels are clanted for clearance and wider spread,

            and then welded to the strong 5" U channel side members.

                                                                      Front splash guards are standard equipment.

                                                                      The side flares are made of 10 gauge G210 culvert grade galvanized steel.

                       The Model 235 Spreader has a 29" diameter beater with 14 replaceable paddles.

                        The beater has two types of paddles:

                                       Blunt for widespread....Sharp Ripper for cutting & shredding.

                        The beater side wiper blades are standard.