BC5000 Small Square Balers

          A Proud Heritage

Over 70 years ago, New Holland introduced the first successful

automatic hay baler.  Farmers rushed to buy it, and that's

the way it continues.  You can rely on your New Holland baler

to be produce consistent bales every time.  There are

Three different 14 x 18 models, plus a high-output 16 x 18 model.

Choose the one that meets your needs.  All are designed to

provide years of reliable service. 

•             New Holland bales are the only choice for hand-feeding 
•             Rugged bale chamber 
•             Fast plunger speed & long 30-inch plunger stroke
•             Proven twine knotters or wire twisters
•             Heavy-duty tongue
•             Tapered roller bearings and heat-treated, alloy-steel gears
•             A power-pivot PTO
•             Auxiliary lights

Model		Min. HP Required		Bale Cross Section Size		Super-Sweep Pickup		Feeder System		Feed Opening
BC5050		35 PTO		14 x 18 in.		65 in.		Flow-Action®		283 sq. in.
BC5060		62 PTO		14 x 18 in.		65 in.		Rotary		283 sq. in.
BC5070		75 PTO		14 x 18 in.		75 in.		Rotary		283 sq. in.
BC5080		80 PTO		16 x 18 in.		75 in.		Rotary		318 sq. in.

72 Bale Thrower

The New Holland 72 Bale Thrower can completely fill an

18-foot wagon with bales up to 38 inches long & 65 pounds in weight without

 restricting baler capacity (higher bale weights are possible).

The 72 is compatible with the BC5050, BC5060 and BC5070.

Adjustment and servicing is easy, thanks to a clean and simple design.

Strong, durable diamond-tread belts provide reliable performance.

Tractor-mounted distance control toggle switch makes it easy to change the throwing speed of the belts to change the distance bales are thrown.  The thrower can also be set to drop bales directly on the ground if needed without removing it from the baler.

A distance indicator lets you know at a glance the relative distance bales are thrown.

Direction control allows you to change the position of the thrower.  When you move the tractor remote control valve, a double-acting hydraulic cylinder pivots the thrower up to 30 degrees left or right, for turning or baling on a contour.

A wagon hitch attaches to the baler axle to keep towing stresses where they belong.  It adjusts to narrow road width for easy transport.

Rod spacers allow you to control apron spacing when baling light, springy, or semi-cured material.

Haybine Mower-Conditioners

          The best in plug-free cutting and conditioning

When it's time to buy a mower-conditioner, go with a genuine New Holland Haybine mower-conditioner, the one that started it all.

Full lateral header flotation allows the header to hug the ground for clean cutting while minimizing scalping and cutterbar damage.

Effective sickle cutterbar delivers a precise, smooth cut - even trough changing or difficult conditions.

Full-width, chevron-design, intermeshing rubber conditioning rolls provide gentle and thorough conditioning for fast drydown.  All models feature the proven torsion-bar roll-pressure system for plug-free operation and consistent cracking of stems.

The exclusive Rolareel header on the 499 uses a converging reel to sweep the crop directly into the conditioning rolls.  There's no auger needed.  Since the rolls are mounted in the main frame, the header is light enough to react quickly to the changing ground contour for a closer, cleaner cut.

The pivot-tongue convenience of the 499 allows you to open fields easily, cut square corners and mow back and forth on the same side of the field.  The spring-loaded tongue lock is easy to latch, so you don't waste time when your're ready to transport.

Tongue control on the 472 and 488 is handled with a simple rope control mechancial transport lock.  Hydraulic tongue shift is standard on the 499 pivot-tongue model.

Equal-angle PTO (472 and 488) minimizes driveline vibration, even when making 90-degree corners.

A convenient knife assembly storage compartment allows for easy in-field changes.

Model		Width		Conditioning Roll Length (Crushing Area)
472		7 ft. 3 in.		85 in.
488		9 ft. 3 in.		102 in.
499		12 ft. 3 in. pivot-tongue		110 in.

Discbine Disc Mower-Conditioners

          Fast field speeds, quick drydown and earlier baling

Discbine disc mower-conditioners quickly turn standing crop into fast-drying windrows or swaths.  They slice through thick, tangled, wet crops and mow through fire ant hills and gopher mounds without missing a beat.  The New Holland Discbine line ranges from seven-disc models that cut a 9-foot swath up to twelve-disc models that sweep through 15 ft. 7 in. at a time.

The New Holland MowMax cutterbar offers clear-cut advantages, like individual disc modules with sealed gear cases and independent allow drive shafts for smooth, trouble-free mowing.  Every MowMax cutterbar is equipped with ShockPro disc drive hubs that absorb the shock of field impact before damage to drive components can occur.

Choose the conditioning system that best matches your needs - chevron-design, rubber rolls for gentle, consistent conditioning (Models H7220, H7230, H7450, H7460) or the New Holland flail conditioning system (Models H7230, H7330, H7550, H7560) that delivers even faster drydown and can allow you to bale up to a day sooner in grass crops.

Switching from swath to windrow, or changing windrow or swath width is fast, simple and requires no tools.  You can spread crop from a fast-drying swath as wide as 8 feet (depending on model) to a tight 3 foot windrow that's ready to bale or chop.

Hydraulic header tilt is standard equipment, letting you make changes to cutting height on-the-go from your tractor seat.

Adjustable flotation springs help you get all the crop with out scalping.

High-density polyethylene impact hood liner reduces rock damage.

Center-pivot tongue design (H7450, H7550, H7460, H7560) swings 38.5 degrees to the right or left to provide outstanding turn-and-go maneuverability.  You can mow to either side or behind the tractor.

A center-pivot, swivel-hitch tongue (standard on the H7460 and H7560 and optional on the H7450 and H7550) provides even greater maneuverability.  It's the tongue design you need for making over-square corners, tight headland turns and cutting around field obstacles.

The unique bent-tongue design on the H7239 and H7330 beatures a constant-velocity joint driveline and on-the-go hydraulic swing for exceptional maneuverability.  You get the convenience and performance of a swivel hitch without the need for a three-point hitch or drawbar extension.

Model		Number of Discs		Cutting Width		Conditioning System		Tongue Design
H7220		7		9 ft. 2 in.		Rubber Rolls		Straight Tongue
H7320		7		9 ft. 2 in.		Flails		Straight Tongue
H7230		8		10 ft. 4 in.		Rubber Rolls		Bent Tongue
H7330		8		10 ft. 4 in.		Flails		Bent Tongue
H7450		10		13 ft.		Rubber Rolls		Center-pivot
H7550		10		13 ft.		Flails		Center-pivot
H7460		12		15 ft. 7 in.		Rubber Rolls		Center-pivot
H7560		12		15 ft. 7 in.		Flails		Center-pivot

Rolabar Rakes:

          Pick up more of your valuable hay.

New Holland Rolabar rakes let you feed cleaner hay and more of it.  Offset wheels are set close to the basket, so tines follow the ground contour closely to pick up all the hay - but leave the dirt behind. 

In-line telescoping drive transfers power from the wheels to the reel through heat-treated gears.

Height adjustment cranks permit adjustments to either side of the basket for proper ground clearance.

Crank arm locks prevent arms from changing positions over rough terrain.

Proven basket suspension provides a full grange of settings.  Tines tilt up for fluffy, fast-drying windrows or down for tight windrows.

Trip lever for gearbox clutch can be engaged from the tractor seat.  No need to disconnect the drive each time you town the rake (ground-drive models).

Dual-raking Models (Models 216 and 252 Rake Hitch)

Using two rakes instead of one cuts labor, fuel consumption and tractor time in half.  Transport, ooperate and adjust two Rolabar rakes without leaving your tractor seat with the 252 rake hitch.

Rake hitch has a narrow 8 ft. 11 in. transport width. Flexibility to rake two separate windrows, or combine two swaths or windrows into one. Use with all New Holland rakes: 8 ft. 6 in. or 9 ft. 6 in. rakes, ground-drive or hydraulic-drive, right- or left-hand delivery, or in combination. For the big-acreage haymaker, the 216 rakes up to 27 feet in one pass. Unitized frame carries two 10 ft. 6 in. baskets that rake a path wide enough to combine two windrows from 16-ft. windrowers. Maintains constant windrow width, even in sharp turns. Folds to a narrow ten feet for easy transport. Change settings right from your tractor seat with the rake control box. Easy-to-set frame and basket limit stops let you repeat your last frame setting each time you open the rake. Rubber Dyna-tines provide long life. They are mounted individually and can be replaced easily and economically. Superior basket suspension lifts tines over obstacles for cleaner raking and less tine failure.

Model		Raking Width		Drive
57		8 ft 6 in.		PTO powered
256		8 ft. 6 in. Ground drive, left-hand delivery		Ground
258		9 ft. 6 in.		Ground or hydraulic
260		9 ft. 6 in.		Ground or hydraulic
216		10 ft. 6 in. each basket ; Up to 27 ft. with both baskets
252 Rake Hitch		24 ft. with two 9 ft. 6 in. rakes		Ground or hydraulic

BR7000 Series Roll-Belt™ Round Balers

Tight, uniform bales in any crop or condition

You’re always looking for a better way to bale. Well, look no further than the BR7000 Series round balers! New Holland offers eleven distinct Roll-Belt™ baler models that produce bales weighing from 300 to 2,200 pounds. Some are specially designed to bale crops with moisture content up to 65 percent for high-quality round bale silage.

New Holland boosts your baling efficiency with these BR7000 Series improvements:

• A new hydraulic bale ejector ramp is available as a dealer-installed option for the BR7070 and BR7090. It uses a one-way hydraulic cylinder that allows the ramp to instantly move down when the tailgate is raised and the bale comes out. When the tailgate is closed, the ramp goes back to the home position, and the bale is pushed away from the tailgate, allowing the tailgate to close.
  
  
• Stronger shot-peened tines replace the previous music wire tines on all pickups (except the BR7050 and BR7060 Standard). These new tines last longer, are more durable in tough conditions and curved for optimal crop lifting.
  
  
• Two formed ribbed rolls replace two dimple rolls in the bale chamber for improved bale formation. These rolls are made of thicker steel and have improved life and durability.
  
  
• One less spreader roll means net flow is more even and net spread is smoother and more uniform.

Extra-wide pickups ensure fast, positive feeding:

• XtraSweep™ Pickup—the widest in the industry
• Super Sweep™ Pickup
• Wide Pickup

Fast bale wrapping with fingertip control—only from New Holland:

• Bale Command Plus™ system
• Auto-Wrap™ system
• Twine
• Net (EdgeWrap™ system)
• Net/Twine (EdgeWrap system)

Optional Bale-Slice™ and CropCutter™ systems produce bales that feed more easily.

Model		Bale Diameter, in.		Bale Width, in.		Bale Weight, lbs.		Bale Density
BR7050		30 - 48		46.5		300 - 750		Adjustable
BR7050 High-Moisture		30 - 48		46.5		400 - 1,000		Adjustable
BR7060 Standard		36 - 60		46.5		400 - 1,200		Adjustable
BR7060		36 - 60		46.5		400 - 1,200		Adjustable
BR7060 Silage Special		36 - 60		46.5		400 - 1,800		Adjustable
BR7060 CropCutter™		36 - 60		46.5		400 - 1,800		Adjustable
BR7070		36 - 72		46.5		400 - 1,650		Adjustable
BR7070 All-Purpose		36 - 72		46.5		400 - 2,200		Adjustable
BR7070 CropCutter™		36 - 72		46.5		400 - 2,200		Adjustable
BR7080		36 - 60		61.5		500 - 1,550		Adjustable
BR7090		36 - 72		61.5		500 - 2,200		Adjustable