Mowers - Mid-mount Finishing Mow close to trees, shrubs and buildings. Add a grass collection system too. You'll cut mowing jobs down to size with a mid-mount finishing mower from New Holland. The beauty of a mid-mount mower, is that it's easy to mow right next to trees, shrubs and buildings while still keeping an eye on the job. And, you'll appreciate the mowing quality. There are four cutting widths available: 54, 60, 72 and 84 inches.

The 54CMS and 60CMS Mid-Mount Finishing Mower are the perfect match for New Holland Boomer™ sub-compact tractors. Choose the 914A Mid-Mount Finishing Mower to fit Boomer models TC21DA, TC23DA, TC24DA, TC26DA, TC29DA, TC33DA, TC35D/35DA, TC40D/40DA, TC45D/45DA. Depending on the model, you can select mowing widths from 54 to 84 inches.

Grass Collection Systems are available for the 54MS and 60MS mid-mount mowers and for the 54- and 60-inch 914A mowers. Both feature a quick-attach design, that allows you to easily change between bagging and side discharge, and a three-bag collection system that keeps emptying stops to a minimum.

Models		Cutting Widths		Tractor Compatibility
54CMS (side discharge)		54 inches		TZ18DA, TZ24DA, TZ22DA and TZ25DA
60CMS (side discharge)		60 inches		TZ18DA, TZ24DA, TC22DA and TC25DA
914A (side discharge)		54, 60 and 72 inches		TC21DA, TC23DA, TC24DA, TC26DA, TC29DA, TC30 and TC33DA
914A (rear discharge)		60, 72 and 84 inches		TC21DA, TC23DA, TC24DA, TC26DA, TC29DA, TC30, TC33DA, TC35DA, TC40DA and TC45DA

• Heavy-duty models feature gear drive and high-speed tines with greater tip speed for one-pass tilling.
• Designed to fit tractors from 13.5 to 50 PTO hp equipped with Category I or II hitch (depending on model) and 540-rpm PTO.
• Box section steel frame supports the Category I or II three-point hitches, depending on model.  Outside hitch pin brackets are bolted to the frame-and are adjustable for offset operations such as tilling close to obstacles or buildings.  Deck is constructed of 1/8 inch-thick steel for built-in strength.
• 540-rpm PTO is slip-clutch protected to prevent driveline component damage.
• Driveline universal joints and rotor shaft bearings have grease fittings for longer life.  And, both the input gearbox and side gearbox run in oil for smooth power transmission and minimal wear.
• Adjustable rear shield controls tilling action.  The lower shield, the more pulverized the soil.  Raise the shield for a coarser soil texture.  Convenient chain support makes adjusting shield height quick and easy.
• Oil-bath input and side gear boxes assure smooth, efficient, power transmission and superior durability.
• Adjustable skid shoes control tilling depth to one of four preset depths (7 1/4 inches maximum).
• Curved tips on the steel tiller tines assure optimum performance.

7308 Loader

TC30 Compact Tractor

Equip your TC30 Compact Tractor with a 7308 Loader and you can move some not-so-compact loads. It handles a long list of chores around farm, home and landscape sites.

• Heavily reinforced frames and durable chromed hydraulic cylinder rods deliver excellent reliability and long life.
• The single, joy-stick control mounts on the loader tower and is positioned to the right of the steering wheel.
• Simple, Quick-Attach design allows the operator to easily mount or remove loader without tools.
• Construction-grade, heavy-duty, non-rotating pins are used throughout the loader for easy servicing, greater strength and durability.  All pins are rifle drilled for lubrication.  Rifle drilling protects the grease zerks from damage.
• Heavy-duty 60-inch and 68-inch buckets are available for tough working conditions.  Both buckets are available with reversible bottom cutting edges for longer edge life.

10LA Loader

Boomer Sub-Compact Tractor

TZ18DA, TZ22DA, TZ25DA

Equip your Boomer Sub-Compact Tractor with the optional 

10LA front loader and you'll move mulch, gravel and snow fast.

• 662-lb. lift capacity increases productivity.
• Unique curved-boom design provides better visibility to the bucket, best-in-class reach as well as greater strength with less weight and mass than the conventional "dog-leg" loader booms you';; find on other brands.
• Four-bar linkage provides greater rollback for more complete bucket filling, better material retention and a greater dump angle for cleaner dumping of sticky material.
• The large rectangular loader torque tube adds durability and strength to resist boom twisting if there's a heavy load on one side of the bucket.
• The loader joystick is located on the right loader mount with the lever just to the right of the steering wheel.
• The Quick-Latch system allows you to remove and install the loader quickly.  Just remove retaining pin, disconnect the loader stand pin and lower the stand, extend the lift cylinders, disconnect hydraulic lines and back away.
• The mid-mount frame design not only makes connecting and disconnecting the loader fast and simple, it also makes it easy to service the tractor engine, radiator, battery and components that are under the hood.
• Construction-grade, heavy-duty, one-inch, non-rotating pins are used throughout the loader for easy servicing, greater strength and durability.  All pins are rifle-drilled for lubrication.  Rifle drilling protects the grease zerks from damage.
• Best-in-class compatibility means New Holland loader mounting brackets are not only compatible with mid-mower brackets, they're also compatible with snow blower or front-blade mounting brackets.

Loaders for Boomer Compact Tractors

12LA    -      TC23DA & TC26DA

14LA     -     TC29DA, TC31DA, TC33DA & TC34DA

15LA     -    TC29DA, TC31DA, TC33DA & TC34DA

16LA     -     TC35A, TC35DA, TC40A, TC40DA, TC45A & TC45DA

17LA     -     TC35A, TC35DA, TC40A, TC40DA, TC45 & TC45DA 

Sleek Boomer front-end loaders are specifically designed to complement the Boomer sloped hood.  There's no "dog leg" to obstruct your view to front and sides.  Take your seat behind the wheel and you'll find that you can easily see to the top edge of the bucket, and a large area in front of the bucket for the smallest "blind spot" on the market.  And, Boomer loaders are versatile, allowing you to move gravel, mulch, hay or snow fast. 

• Unique curved-boom design provides better visibility to the bucket, best-in-class reach as well as greater strength with less weight and mass than the conventional "dog-leg" loaders booms you'll find on other brands.
• Four-bar linkage provides greater rollback for more complete bucket filling, better material retention at travel height and a greater dump angle for cleaner dumping of sticky material.
• Standard bucket level indicator is located inside the right boom arm to make it easy for you to return to the pile with a level bucket.
• The loader joystick is nestled into the tractor fender for easy, right-hand operation.  On deluxe Boomer (DA) models, the joystick includes push-button control of the DualPower transmission for greater convenience and productivity...an industry first!
• The large rectangular loader torque tube adds durability and strength to resist boom twisting, if there's a heavy load on one side of the bucket.
• The Quick-Latch system allows you to install the loader in minutes and remove it just as quickly - without tools.  Just remove retaining pin, disconnect the loader stand pin and lower the stand, extend the lift cylinders, disconnect hydraulic lines and back away.
• The mid-mount frame design not only makes connecting and disconnecting the loader fast and simple, but it also allows for complete turning for outstanding maneuverability and makes it easy to service the tractor engine, radiator, battery and components that are under the hood.
• Construction-grade, heavy-duty, one-inch, non-rotating pins are used throughout the loader for easy servicing, greater strength and durability.  All pins are rifle drilled for lubrication.  Rifle drilling protects the grease zerks from damage.
• Best-in-class compatibility means New Holland loader mounting brackets are not only compatible with mid-mower brackets, but they're also compatible with snow blower or front-blade mounting brackets.
• The optional Quick-Attach faceplate (skid steer compatible) allows you to switch easily between attachments like Quick-Attach buckets, farm forks, pallet forks and bale spear. (Not available on the 12LA loader)
• Mounting flanges wrap around the buckets to spread digging force over a large area for long-lasting durability.